/////////////////////////////////////////////////////////////////////////////////////////
KONICA MINOLTA Universal Print Driver Ver.2 Maintenance Release 9 (PS/ Version 2.90.0.0)
										2015/10/30
/////////////////////////////////////////////////////////////////////////////////////////

1. Release version and download file name
The newly released program version and download file name are as follows.

If Universal Print Driver is installed in PC with older than v2.0.2.0, the following message is displayed and this version (v2.80.0.0) cannot be installed.
"The printer driver is not a target for update. Please try again after updating to Version 2.0.2.0."

Please be sure to install this version (v2.80.0.0) after updating the version to v2.0.2.0.
It is not possible to update under the environment where Installer is not available.
It is not possible to update via Special Universal Print Driver.

[Release version]
Program Name			Current Ver.	New Ver.	Language
KONICA MINOLTA Universal PS	2.80.0.0	2.90.0.0	JA/EN/FR/IT/DE/ES/KO/ZH-CN/ZH-TW/PT/NL/DA/FI/NO/SV/CS/HU/PL/SK/SL/RO/RU/EL/TR/CA/EU    
	
Install Type:	EXE or INF type	

Model								Child Driver Version	Note
Baseline *1							1.0.1.UPD_04	
KONICA MINOLTA A3 common *3					1.0.1.UPD_03
KONICA MINOLTA mc8650						1.0.1.UPD_03	
KONICA MINOLTA A4 common *2					1.0.0.UPD_02
KONICA MINOLTA C30P/C31P					1.0.0.UPD_02
KONICA MINOLTA C20						1.0.0.UPD_02
KONICA MINOLTA C20P						1.0.0.UPD_02
KONICA MINOLTA 40P						1.0.0.UPD_02
KONICA MINOLTA mc5550/mc5570					1.0.0.UPD_02
KONICA MINOLTA mc5650/mc5670					1.0.0.UPD_02
KONICA MINOLTA mc4650						1.0.0.UPD_02
KONICA MINOLTA mc4695MF						1.0.0.UPD_02
KONICA MINOLTA pp4650/pp5650					1.0.0.UPD_02
KONICA MINOLTA mc5450						1.0.0.UPD_02	
KONICA MINOLTA 501/421/361					2.0.1.UPD_03	
KONICA MINOLTA 751/601(1.0.2.UPD_03)				1.0.2.UPD_03		MFP FW ver.19 series or older
KONICA MINOLTA 751/601(2.0.0.UPD_03)				2.0.0.UPD_03		MFP FW ver.20 series or later
KONICA MINOLTA C650/C550/C451					6.3.1.UPD_04	
KONICA MINOLTA C353/C253/C203					6.3.1.UPD_04	
KONICA MINOLTA 350/250/200					1.1.2.UPD_03	
KONICA MINOLTA 362/282/222					1.1.0.UPD_03	
KONICA MINOLTA C652(DS)/C552(DS)/C452				3.0.16.UPD_04	
KONICA MINOLTA C360/C280/C220					3.0.16.UPD_05	
KONICA MINOLTA 423/363/283/223					1.1.1.UPD_03	
KONICA MINOLTA 652/602/552/502					1.1.0.UPD_05	
KONICA MINOLTA C35						1.1.2.UPD_03
KONICA MINOLTA C35P/mc4750					1.1.2.UPD_03
KONICA MINOLTA C25						1.1.2.UPD_03	
KONICA MINOLTA 20						1.0.1.UPD_06	
KONICA MINOLTA 20P						1.0.1.UPD_06	
KONICA MINOLTA 42/36 (EU/JP)					1.0.1.UPD_01	
KONICA MINOLTA 42/36						2.0.0.UPD_02	
KONICA MINOLTA C754(e)/C654(e)					5.1.2.UPD_01	
KONICA MINOLTA C554(e)/C454(e)/C364(e)/C284(e)/C224(e)		5.1.2.UPD_01	
KONICA MINOLTA 754(e)/654(e)					5.1.2.UPD_01	
KONICA MINOLTA 4700P/4000P/3300P/3301P				2.0.2.UPD_01	
KONICA MINOLTA 554e/454e/364e/284e/224e				5.1.2.UPD_01	
KONICA MINOLTA C3850/C3350/C3850FS				3.0.0.UPD_01	
KONICA MINOLTA 4020/3320					1.2.0.UPD_05	
KONICA MINOLTA 4750/4050					3.0.1.UPD_01	
KONICA MINOLTA 25e						1.0.0.UPD_04	
KONICA MINOLTA C3100P						1.3.0.UPD_01	
KONICA MINOLTA C3110						1.2.0.UPD_01	
KONICA MINOLTA C281						1.0.1.UPD_03	
KONICA MINOLTA 367/287/227					1.0.8.UPD_05	
KONICA MINOLTA C368/C308/C258					2.0.6.UPD_05	
KONICA MINOLTA C287/C227					3.1.4.UPD_04

*1 Baseline: Common driver (mc1650/2550/7450/7450II/C10P, etc)
*2 KONICA MINOLTA A4 common : KM Common driver (pagepro Series, magicolor(A4))
You can select C30P/C31P/C20/C20P/40P/mc5550/mc5570/mc5650/mc5670/mc4650/mc4695MF/pp4650/pp5650/ mc5450 from Model Name.
*3 KONICA MINOLTA A3 common : KM Common driver (bizhub Series(A3), mc8650,etc)
 You can select mc8650 from Model Name.
*4 When trying to connect to a device from Device Selector window and individual child driver is not contained, KM common driver may be used. In case the child driver for each model, KM common driver can not be used, the common driver (Baseline) will be selected.

[Download file name]
KM_UniversalDriver_PS_2.90.0.0_x86.zip
KM_UniversalDriver_PS_2.90.0.0_x64.zip
UPD_WhitePaper_v2.9_EN_20151009.doc
PRI_DLBT1511151EN_0.doc

 
[Supported OS]
OS						WHQL
Windows Server 2003, Standard Edition		Yes
Windows Server 2003, Enterprise Edition		Yes
Windows Server 2003 R2, Standard Edition	Yes
Windows Server 2003 R2, Enterprise Edition	Yes
Windows Server 2003, Standard x64 Edition	Yes
Windows Server 2003, Enterprise x64 Edition	Yes
Windows Server 2003 R2, Standard x64 Edition	Yes
Windows Server 2003 R2, Enterprise x64 Edition	Yes
Windows Vista Home Basic*			Yes
Windows Vista Home Premium*			Yes
Windows Vista Ultimate*				Yes
Windows Vista Business*				Yes
Windows Vista Enterprise*			Yes
Windows Server 2008 Standard*			Yes
Windows Server 2008 Enterprise*			Yes
Windows Server 2008 R2 Standard			Yes
Windows Server 2008 R2 Enterprise		Yes
Windows 7 Home Basic*				Yes
Windows 7 Home Premium*				Yes
Windows 7 Professional*				Yes
Windows 7 Enterprise*				Yes
Windows 7 Ultimate*				Yes
Windows 8 *					Yes
Windows 8 Pro*					Yes
Windows 8.1 *					Yes
Windows 8.1 Pro*				Yes
Windows Server 2012 Standard			Yes
Windows Server 2012 Datacenter			Yes
Windows Server 2012 Essentials			Yes
Windows Server 2012 R2 Standard			Yes
Windows Server 2012 R2 Datacenter		Yes
Windows Server 2012 R2 Essentials		Yes
Windows 10 *					Yes
Windows 10 Pro*					Yes
				
    * Both 32bit(x86), 64bit(x64)
      Support the following operation environments. 
- Windows Server 2003 / 2008 Cluster Server Service(32/64 bit)
- Windows Server 2008 R2 / 2012 / 2012 R2 Cluster Server Service
- Citrix Presentation Server 4.5
- Citrix XenApp 5.0/6.0/6.5/7.5/7.6
- Terminal Services
- Remote Desktop


 
2. What changed
2-1. The following issues are solved in this version.

1.	If a Printer Driver is installed by Point&Print between PCs whose OS languages are different, and a Language setting is set to "Auto", a watermark in a language specified by a client PC is not printed.

2-2. The following issues are modified in this version.

1.	Following Child drivers are added.
- KONICA MINOLTA C287/C227

2.	Support the following models.
- KONICA MINOLTA C287/C227


 
3. Restrictions
1.	The message "Operation could not be completed." may be displayed when you open the Device Selector window from Printing Preferences...(document property) and then, close with Cancel button.

2.	With the Windows Server 2003:
1)	To open the help topic, "?" button on the Upper right on the driver dialog does not work.
2)	To open the help topic, the right button click menu of the mouse does not work.
Note: Windows Vista does not have above two features. It is the restriction from OS.
Note: To open help topic, please click help button on the driver dialog.

Applies to the following models:
KONICA MINOLTA C450/C450P/C351 
KONICA MINOLTA C352/C352P/C300 
KONICA MINOLTA C250/C250P 
KONICA MINOLTA C252/C252P 
KONICA MINOLTA 350/250/200 
KONICA MINOLTA 500/420/360 
KONICA MINOLTA 750/600 

3.	There are following restrictions under IPv6 connection.
<The case that is used linklocal address>
The driver cannot acquire the device information but, Printing is possible.
Use IPv4 to acquire the device information.

<Connecting to MFP with an IPv6 global address does not work.>
Please connect with IPv4 address or please use IPv6 link local address when it is not necessary to be retrieved the device information.

Applies to the following models:
KONICA MINOLTA C650/C550/C451 
KONICA MINOLTA C353/C253/C203 
KONICA MINOLTA C450/C450P/C351 
KONICA MINOLTA C352/C352P/C300 
KONICA MINOLTA C250/C250P 
KONICA MINOLTA C252/C252P 
KONICA MINOLTA 350/250/200 
KONICA MINOLTA 500/420/360 
KONICA MINOLTA 750/600 
KONICA MINOLTA 751/601 

4.	If you perform Booklet Printing using the following drivers, direction and position of the image on the job is not printed correctly. 
- Baseline PS (Common for all venders)
- KONICA MINOLTA A4 PS (KM Common driver for Printer Model)

Countermeasure
PostScript Driver:
After setting "Advanced> PostScript Pass Through" to "Disable", please perform printing.

5.	When printing the job from Microsoft PowerPoint2007 or later, "Remove White Background" does not work in the Universal Print Driver.

6.	If you print the job from Microsoft Excel when selecting the destination printer on the Device Selector and using it, paper size and printing direction that were saved in Excel file may not be reflected. 

Countermeasure
Please select Excel file >Print >Properties and perform setting again

 
7.	If you open "Properties" when using Universal Print Driver under the following conditions, do not switch the application until the Device Selector is opened. 
When the following sympton1 occurs, please close the Device Selector.

Condition:
32bit Application is installed on Windows 64bit OS.

Procedure/ Symptom
1)	Open Print> Properties of 32bit application (ex. applicationA). After that, if you switch to another application (ex. applicationB), switched application (applicationB) does not respond.
2)	If you close "Print Dialog" of 32bit application (applicationA) under the condition1, 32bit application (applicationA) does not respond.

8.	In Dynamic Mode, even if change the port from the Device Selector screen, the port may not be changed when opening Printer properties. (Specification for OS)

9.	In Dynamic Mode, if change the port from Printer properties, the job may not be printed to correct port.

Countermeasure
Please change the port from the Device Selector screen.

Occurring PDL
  - PS Driver

10.	When add the printer Driver using Point&Print and it is connected via IPV6, there is a restriction as below. 

When change the Printing Preferences, it is returned to the default setting after printing. 
Occurring PDL
 - PS Driver

11.	On Microsoft Publisher 2007, there is a restriction as below.

After installing Universal Print Driver, if you never use it and print the job from Dynamic Mode, Printing Preferences is not reflected in the printing result. 

Countermeasure 
1)	Close Microsofot Publisher 2007.
2)	Open Printing Preferences of Universal Print Driver from "Printer and Faxes".
3)	Select the Device from the Device Selector screen and click "OK" button in displayed Printing Preferences screen.

 
12.	In Citrix Presentation Server 4.5/Citrix XenApp 5.0/6.0/6.5, there are restrictions as below.
- Dynamic Mode is not supported. Please use Traditional Mode.

- When installing Universal Print Driver to Client PC from Traditional Mode, if Admin Privilege User opens "Printing Preferences" or "Properties" of AutoCreate Driver, the Device Selector screen is started. (Specification for Presentation Server 4.5/ Citrix XenApp 5.0/6.0/6.5)
	It is possible to print the job if select output port and child driver from started Device Selector screen.
If any user except Admin Privilege user performs this, this symptom does not occur.

 - If perform the following operation, cannot close the Properties screen of Citrix Universal Print Driver. (Specification for Universal Print Driver of Citrix)
1)	Create the printer icon from Traditional Mode on the Client PC.
2)	Connect to the Citrix.
3)	When open the Properties of AutoCreate Printer icon from "Printer and Faxes", the Properties of Citrix Universal Print Driver is displayed. 
4)	If click "Local Printer Settings" button, the Properties of KONICA MINOLTA Universal Print Driver is displayed. Click "OK".
5)	Even if click OK or Cancel from the Properties of Citrix Universal Print Driver, the Properties screen is not closed. 

If open the Properties from the application, this symptom does not occur.

Countermeasure
- Please open the Properties setting from the printer icon that created from Traditional Mode of Client PC and perform setting before connecting to the Citrix. 

-"Combination" function in "Layout" tab does not work.
Occurring PDL
- PS Driver

13.	Any user except the user installed Universal Print Driver or Admin Privilege User cannot open the Device Selector screen.

When open the Device Selector screen, please use "Run as administrator".

Occurring OS
- WindowsVista
- Windows Server 2008

14.	In CorelDRAW Graphics Suite, if select "Collate", it does not work.

Countermeasure 
1)	Select "File"> "Print". 
2)	Click "References" button and select "Printer Preferences" of Driver.
3)	Select "Collate" of "Printer Preferences". 
 
15.	When performing the operation below, the following symptom may occur depending on the PC. 

- Right-click the printer icon that added from Traditional Mode and click "Properties".
   If perform this operation continuously, the following symptom may occur. 
- Multiple Properties screens may be opened. 
- Abnormal end of Explorer may occur. 

- In Dynamic Mode, after selecting the Device from the Device Selector screen, right-click the driver and click "Properties" before Properties screen is displayed.
If perform this operation continuously, the following symptom may occur.

- Multiple Properties screens may be opened. 
- Abnormal end of Explorer may occur. 

-If click "Printer Preferences" of General Tab many times, the following symptom may occur.
- Multiple Properties screens may be opened. 
- Abnormal end of Explorer may occur. 

Countermeasure
Close all Properties/Printing Preferences screens and open them again.
When abnormal end of Explorer occurs, perform log off and log on.

16.	If "Share the Printer" is selected and the printer icon is created under the following setting, it fails to create the printer icon. (Restriction of OS)
Control Panel > Network and Sharing Center > Change advanced sharing settings > File and Printer sharing
"Turn off file and printer sharing"

Please select "Turn on file and printer sharing"

Occurring OS
- Windows Vista
- Windows Server 2008
- Windows 7

17.	In Terminal Service/ Remote Desktop, there are restrictions as below.

<TS Easy Print / RD Easy Print>
- Easy Print is not supported.

<Terminal Service/ Remote Desktop (traditional Printer Redirection)>
- The user who is not allowed installation of printer driver on OS security can not use Universal Print Driver.
- If Admin Privilege User opens "Printing Preferences" or "Properties" of printer icon created by Traditional Mode, the Device Selector screen is started. Please select the same model as the printer icon that you are trying to open in the Device Selector screen and close it. And then open "Printing Preferences" or "Properties" of printer icon.
- If you never open printing preferences of the printer icon and printing the job after creating printer icon by Traditional Mode, the job is not printed out.

18.	"Overlay (File List Information)" is displayed in Favorite Setting on the following printer drivers.
- KONICA MINOLTA 42 Series PS
- KONICA MINOLTA C35/C35P/mc4750/C25 PS

19.	If Properties is opened by "Run as administrator" on Windows Vista, Multiple Device Selector screen can be opened. (Restriction of OS)

20.	If printer icon is created by Traditional Mode using the printer driver before this version, the following symptom occurs.
- When update to this version, Paper Type setting changes to default setting if you never open properties of the printer icon.

 
21.	In "Add Printers from Printer List" function, there are restrictions as below.

- The following symptoms may occur when PC is not rebooted after deleting the created printer icon.
    The printer icon may be created by the deleted model name under the following situation.
    - MFP/Printer A and MFP/Printer B is the same IP address.
    - MFP/Printer A and MFP/Printer is different model.
       1. Delete the printer icon for MFP/Printer A.
       2. Create the printer icon for MFP/Printer B.
       Result: The created printer icon name is MFP/Printer A

- The spooler screen may be displayed while creating printer icon.

22.	There is following restrictions under Point and Print environment when the added watermark which is not shared and it is set as default on the Server.
- The watermark below the added watermark on the Server is not reflected on client.

23.	When the Spin button is clicked continuously, the Spin button may not be displayed.

24.	If the printer icon is created by Traditional Mode using "Network Search" under the following situation, the Child driver is not selected correctly. (Restriction of OS)
- The printer icon of MFP/Printer with the same IP address and the same Device Name (Device Name in Machine Setting) exist on the network is created again after create the printer icon.

25.	The following symptom occurs under Point and Print environment. (Restriction of OS)
"It could not access to the printer" or "Operation could not be completed." is displayed and Property of printer icon on client can not be opened under the following situation.
- OS: Windows 7
- UPD Version: v1.0.1.0/1.2.1.0/1.3.1.0/1.10.0.0/1.11.0.0
And updating to this version from above version.
- ":" + "character of A to F" is used for printer icon name.

26.	If printer icon is created by Traditional Mode using the printer driver before this version, the following symptom occurs.
- When update to this version, only "A4" or "Letter" is displayed in Paper available screen of properties.

27.	Admin Privilege User except Built-in administrator may not be able to open the Device Selector screen on Server 2012.
	
	If the Device Selector screen can not be opened, please apply the following procedure.
1)	Open the Print server properties.
2)	Click "Add" button in Security Tab and add Admin Privilege User.
	*If "Add" button is grayed out, please select Security Tab after click "Change Form settings" button in Forms 	Tab.
3)	Enable "Allow" of the followings for the added Admin Privilege User.
	- Manage Printers
	- View Server
	- Manage Server

28.	If printing from KONICA MINOLTA 25e by using PS driver, the following symptom occurs.
- Border Line of Combination is not printed correctly (Border Line of Combination cannot be selected in this version).


Countermeasure
Please use PCL driver.

29.	When you select "Share the Printer" of [Add this Printer to my Printers folder] of Device Selector and try to add the printer icon on Windows Vista, "It fails to share the printer" is displayed and the icon cannot be added.

Countermeasure 
Please right-click on the printer icon and select "Run as administrator" to open Device Selector.

30.	On Windows OS 64bit, watermark is not printed from 32 bit application even if the watermark setting is enabled. 

Occurring PDL
  - PS Driver

31.	If using the driver for the following models in the following cases, the Printing Preferences of the color model is displayed because operate as KONICA MINOLTA A3 Common.
- When the device is selected from list of Network Search. (Dynamic Mode).
- When TCP/IP port is selected and the printer icon is created using Add Printer Wizard in Windows.
KONICA MINOLTA 500/420/360
KONICA MINOLTA 750/600

32.	When the print queue is created, the dialog of the Printing Preferences etc.is opened once and closed immediately.

33.	If Security Level of SNMPv3 setting is " auth-password/priv-password ", the acquiring of  the device information fails when the input value of "auth-password" is different from the one of "priv-password".

Countermeasure 
Please input the same value into "auth-password" and "priv-password".

Applies to the following models:
4700P/4000P/3300P/3301P 
4020/3320

34.	The device information can not be acquirined if over 32 characters are input in SNMPv3 Read Only User.

Applies to the following models:
4700P/4000P/3300P/3301P 
4020/3320


4. Important Notice
1.	The reproduction of bizhub20 /20P picture is prohibited.

 
5. How to install/uninstall program

If Universal Print Driver is installed in PC with older than v2.0.2.0, the following message is displayed and this version (v2.90.0.0) cannot be installed.
"The printer driver is not a target for update. Please try again after updating to Version 2.0.2.0."

Please be sure to install this version (v2.90.0.0) after updating the version to v2.0.2.0.
It is not possible to update under the environment where Installer is not available.
It is not possible to update via Special Universal Print Driver.

5.1 How to install
a) When using Installer, 
If your PC is 32-bit environment, please use "UPDSetup.exe". If your PC is 62-bit environment, please use "UPDSetup64.exe". And follow the onscreen wizard to do installation.

* In the following environment, cannot use the Installer. Please refer to c) or d).
- Microsoft Cluster Server
- Citrix Presentation Server 4.5
- Citrix XenApp 5.0/6.0/6.5/7.5/7.6
- Terminal Service (On 2008R2, Remote Desktop Services)

b) When install manually
Please perform installation using Add Printer Wizard in Windows.

c) When installing Universal Print Driver in Microsoft Cluster Server.
c-1) In the node that creates Cluster, access to the printer folder of Virtual Server from Active Node.

c-2) Install Universal Print Driver using add Printer Wizard.
* About the destination port, please specify the optional port. 
* Please select "Do not share this printer".
* In Add Printer Wizard, cannot print the test page. 

c-3) Open Properties of Universal Print Driver on the printer folder and display the Device Selector screen.

c-4) Select the device and create the printer icon from Traditional Mode.
* Using Dynamic Mode is not supported in the Cluster Server.

c-5) Close Properties of Universal Print Driver from "Cancel" button.

c-6) When using Universal Print Driver in Point and Print, set the printer icon that created at C-4) to "share this printer".

d) When installing Universal Print Driver to Citrix Presentation Server 4.5, Citrix XenApp 5.0/6.0/6.5/7.5/7.6
d-1) Please perform installation using Add Printer Wizard in Windows.

Installation Note
When performing installation using Add Printer Wizard in Windows, "Do you want to print a test page?" is displayed while installing Universal Print Driver. Output port is not decided at this point. Therefore, if select "Yes", the test page is not printed out.

5.2 How to un-install Universal Print Driver
a) When uninstall using Uninstaller
      Please start up "Uninstaller" from any of the following and follow the instructions of dialogue box to uninstall the driver.
       - "Start" menu> "All Programs">"KONICA MINOLTA">"Universal PS"
       - "Control Panel"> "Add or Remove Programs"> "Remove" button of "KONICA MINOLTA Universal PS" 
 
b) When uninstall manually
If uninstall the driver completely, please perform the following procedure. 
When uninstalling Universal Print Driver, if the folders or files are hidden, please change the setting to indicate the files and folders.

1.	Delete the printer icon. (for all OS)
- From [Printers (and Faxes)] folder, right click [KONICA MINOLTA Universal PS] icon and select [Delete].
- If you added the printer icon from [Add this Printer to my Printers folder] of Device Selector, please delete all added printer icons.
- After deleting all icons related to Universal Print Driver, go to [file] - [Server Properties] - [Drivers] tab and Remove [KONICA MINOLTA Universal PS].

2.	Delete entries from the Registry. (for all OS)
- [Start] button - [Run...] - input "regedit" - [OK], and start the [Registry Editor]. 
- Please delete all the following keys and each sub-key by the Registry Editor. (Differ in PCL and PS. )
(The existing registry key depends on the version of installed Universal Print Driver.)
<PS>
HKEY_CURRENT_USER\Software\KONICA MINOLTA\KONICA MINOLTA Universal PS

3.	Please delete the following folders. 
<32 bit OS (Windows XP(x86), Server 2003(x86), Vista(x86), Server2008(x86), 7(x86))>
C:\WINDOWS\system32\spool\drivers\w32x86\konica_minoltauniverfe33
<64 bit OS (Windows XP(x64), Server 2003(x64), Vista(x64), Server2008(x64), 7(x64), Server2008R2)>
C:\WINDOWS\system32\spool\drivers\x64\konica_minoltauniverfe33

4.	Delete the UPD child drivers.
-OS might grip the file. Please delete the following folders after restart PC.

<32 bit OS (Windows XP(x86), Server 2003(x86), Vista(x86), Server2008(x86), 7(x86))>
C:\KMUPDcache\x86\PS
<64 bit OS (Windows XP(x64), Server 2003(x64), Vista(x64), Server2008(x64), 7(x64), Server2008R2)
C:\KMUPDcache\x64\PS


6. How to check version information
1.	Open "Printers and Faxes".
2.	Select "KONICAMINOLTA Universal PS".
3.	Right click on the icon and select "Properties". 
4.	Click "Details" button.
5.	Click "Option" button.
6.	Click "Version Information". 


* Company names and product names in this document are the registered trademarks for respective companies.

* 7z.dll that is a part of 7-Zip program is included in this printer driver.
7-Zip is provided under the license of GNU LGPL.
7-Zip can be obtained from www.7-zip.org.



Copyright(C) 2015 KONICA MINOLTA, INC.